Solar Roof Mounts

An all-in-one waterproof flashing and mount to anchor photovoltaic racking systems, solar thermal panels, air conditioning units, satellite dishes, or anything you may need to secure to a new or existing roof. It is made in the USA of all aluminum and includes stainless steel hardware. It works with all standard racks, installs seamlessly and saves labor by not needing to cut away any roofing, will out live galvanized 2 to 1, and is a better low-profile mount.

Description	Specific Gravity	Lag screw specifications:
		5/16” shaft* 3” thread depth	5/16” shaft* per 1” thread depth
Douglas Fir, Larch	.50	798	266
Douglas Fir, South	.46	705	235
Engelmann Spruce
Lodgepole Pine (MSR 1650 f & higher)	.46	705	235
Hem, Fir	.43	636	212
Hem, Fir. (North)	.46	705	235
Hem, Fir. (North)	.55	921	307
Spruce, Pine, Fir	.42	615	205
Spruce, Pine, Fir
(E of 2 million psi and higher grades of MSR and MEL)	.50	798	266

*Use flat washers with lag screws.

Composition Mounts

• Designed for Quick & Easy Retrofitting
• All Aluminum Construction
• All Stainless Steel Hardware
• All Hardware Included
• Flashing Meets or Exceeds Minimum Standards of : NRCA, SMACNA, ARMA, & NFPA

Click here for more product information

Shake Mounts

Shake Mounts are structurally the same as the Composition Mounts. The flashing portion is larger because the exposure is larger. As the paper in a Shake Roof is the actual waterproofing, the Flashing must extend under one course of shakes plus extend under the paper of the next course of shakes to be waterproof.

Flat Tile Mounts

Designed to replace most Flat Concrete Tile profiles. No more concrete cutting or drilling on the roof. No more awkward custom flashings. Fully compatible with:

• Monier
• Eagle
• Hanson
• Life Tile

Click here for more product information

Curved Tile Mounts

Designed to work with any existing Curved Tile profile.

Click here for more product information